CSCI HOME PAGE

Welcome to Wlybur to TSO/ISPF/PDF Commands

Wylbur to TSO/ISPF/PDF Commands

Wylbur to TSO/ISPF/IOF Commands
Wylbur	TSO/ISPF/IOF
LOGON / LOGOFF
LOGON	Connect with same communications software you are currently using to connect to CICS. UTSO Enter Your Userid: Password: New password: Application: utso USERID Application required. No Installation Default IKJ56700A ENTER USERID - usrmk PASSWORD Enter LOGON parameters below: RACF LOGON parameter Userid ===> USRMK Seclabel ===> Password ===> ****** New Password ===> Procedure ===> TSOACCNT Group Ident ===> When you get *** Press enter and start your TSO session ICH70001I USRMK LAST ACCESS AT 08:46:03 ON THURSDAY, FEBRUARY 19, IKJ56455I USRMK LOGON IN PROGRESS AT 09:05:13 ON FEBRUARY 19, 1998 IKJ56951I NO BROADCAST MESSAGES *****
LOGOFF	F3 to the North Dakota University System Main Menu X to the Specify Disposition of Log Data Set screen Enter 2. Delete data set without printing in Process Option if you are ready to logoff. When the message 'Ready' is displayed, type LOGOFF and press enter. If you decided not to LOGOFF Press F3 and you will be returned to the North Dakota University System Main Menu.
PASSWORD
Change Password	On the initial TSO/E LOGON screen: Enter your PASSWORD in the Password field Enter eight character NEW PASSWORD in New Password field You will be asked to reenter the NEW PASSWORD in the New password field for verification. The system will not allow you to reuse any of your five previous passwords.
DEFAULT SETTINGS
Log Data Set Defaults	From the ISPF Primary Option Menu Option 0 for Settings Right Click on Log/List Menu Option 1 for Log Data Set Defaults Enter 2 Delete data set without printing in Process Option Press F3 key
List Data Set Defaults	From the ISPF Primary Option Menu Option 0 for Settings Right Click on Log/List Menu Option 2 for List Data Set Defaults Enter 2 Delete data set without printing in Process Option Press F3 key
Keylists	From the ISPF Primary Option Menu Option 0 Settings Right Click on Function Keys Option 7 Disable keylists
COLUMNS
Show columns SHO COLS	Key COLS over the numbers on the left hand side of the screen. Column indicators will appear above the line where COLS was keyed
End show columns	RESET or key a D over the = (equal sign) in =COLS>
PF KEYS
Define PF Keys DEF PFKn	KEYS Make any necessary changes. F3 to save.
Display PF keys	FKA
Display shorter version PF keys	FKA SHORT
Turn off PF keys	FKA OFF
SPLIT SCREEN
Split screen	SPLIT
End split screen	CANCEL
Swap between split screen	SWAP
SCREEN POSITION
Window up	PF7 Move up one page UP NN (Where NN is any valid number) UP P (Move up one page) UP HALF (Move up one half page)
Window down	PF8 Move down one page DOWN NN (Where NN is any valid number) DOWN P (Move down one page) DOWN HALF (Move down one half page)
Window left	PF10 Move left on the page LEFT NN (Where NN is any valid number)
Window right	PF11 Move right on the page RIGHT NN (Where NN is any valid number)
Bottom of active file REV L	BOTTOM
Top of active file REV F	TOP
LIBRARY MANAGEMENT
SHO DIR	Option 3 for Utilities 1 for Library ISPF Library: Project . . . USRMK Group . . . . PRIVATE Type . . . . LIB Member . . . or Other Partitioned or Sequential Data Set: Data Set Name . . . 'USRMK.PRIVATE.LIB' Press the enter key to display member list
Condense Library	Option 3 for utilities 1 for library C to compress TSO library
Save or Replace Inside a Library SAV #MEMBNAME	SAVE (member is in the active screen)
Store a member under a new name in the same Library SAV #NEWMEMB	From the ISPF Primary Option Menu: Option 3 for Utilities Option 3 for Move Copy Fill in Member name to be copied C for Copy data set or member(s) Fill in new Member name
Store a member in another person's library - that person must be within your group and security has been set up through RACF	From the ISPF Primary Option Menu: Option 2 for Edit ISPF Library: Project . . . USRMK Group . . . . PRIVATE . Type . . . . LIB Member . . . DONNA Type a CC in the line numbers column of the first line you want copied and CC in the line numbers column of the last line you want to be copied. CREATE In the Edit/View - Create screen ISPF Library: Project . . . USDMB Group . . . . PRIVATE . Type . . . . LIB Member . . . HENRY
Delete a member from a Library SCR #FILENAME	From the ISPF Primary Option Menu: Option 3 for Utilities Option 1 for Library From the Library Option Menu Option D for Delete Key in the member name on the ISPF library member line. Or Option 3 for Utilities Option 1 for Library Press enter and all members will be listed. Type a D on the line left of the member name. A message that says *DELETED should appear.
Delete a member outside a Library SCR FILENAME	From the ISPF Primary Option Menu: Option 3 Utilities Option 2 Data Set From the Data Set Utility Menu Option ===> D Key in Data Set Name . . . ROSE4.FILE From the Confirm Delete Menu: Press ENTER key to confirm the delete request. (The data set will be deleted and uncataloged.)
Data Set Allocation	From the ISPF Primary Option Menu: Option 3 for Utilities Option 2 for Data Set Type the Data Set Name using the Data Set Naming Conventions for the third qualifier. It is highly recommended that you use M for enhanced allocation. Other Partitioned, Sequential or VSAM Data Set: Data Set Name . . . 'usrmk.private.file' Volume Serial . . . (If not cataloged, Data Set Password . . (If password protec Option ===> M Press enter - and you will get a blank Allocate New Data Set screen with the Data Set Name and all other fields will be blank. If the fields are not blank, blank them out. Press Enter In the Data Set Utility screen top right you will see Data Set allocated
Save Sequential members outside library	Must allocate dataset first. From the ISPF Primary Option Menu: Option 3 for Utilities Option 2 for Data Set Option M for Enhanced data set allocation. Other Partitioned, Sequential or VSAM Data Set: Data Set Name . . . ROSES.FILE Press enter - and you will get a blank Allocate New Data Set screen with the Data Set Name and all other fields will be blank. If the fields are not blank, blank them out. Press Enter In the Data Set Utility screen top right you will see Data Set allocated From the ISPF Primary Option Menu: Option 2 for Edit Edit Entry Panel Other Partitioned or Sequential Data Set: Data Set Name . . . ROSES.FILE
Create a new member inside a Library COL	From the ISPF Primary Option Menu: Option 3 for Utilities Option 1 for library Option E (edit member) Key in a member name to be created (NEWMEMB) ISPF Library: Project . . . USRMK Group . . . . PRIVATE Type . . . . LIB Member . . . NEWMEMB New name . . You will get a blank screen to create a new member.
Show Allocated Files SHO CAT	From the ISPF Primary Option Menu: Option 3 for utilities Option 4 for Dslist, Press enter to show all data sets allocated.
JOB COMMANDS
RUN UNN	From the ISPF Primary Option Menu: Option 2 for Edit Type SUBMIT at the command line File Edit Confirm Menu Utilities Compilers Test Help --------------------------------------------------------------------- EDIT USRMK.PRIVATE.LIB(ROSE5) - 01.00 Columns Command ===> SUBMIT Scroll An IKJ message will appear at the bottom of the screen indicating the job has been submitted and the unique jobnumber. IKJ56250I JOB USRMK4(JOB00694) SUBMITTED ***
View Output Online FETCH JOBNAME	From the ISPF Primary Option Menu: Option I for IOF or Use the Jump Panel option from the Edit Panel screen by typing =i at the command line. File Edit Confirm Menu Utilities Compilers Test Help ---------------------------------------------------------------------- EDIT USRMK.PRIVATE.LIB(ROSE5) - 01.00 Command ===> =i Scroll ===> PAGE **** *************************** Top of Data From the IOF Option Menu: Press ENTER to display all of your output jobs ------------------------------ IOF Job List Menu ------------- COMMAND ===> SCROLL --------------------------------- Output Jobs -------JOBNAME--JOBID--ACT-STA-OWNER----DEST/DEVICE--------RECS-HELD _ 1 USRMK4 J00694 USRMK UNDJES2 192Key in the JOBNAME number to get your IOF Job Summary ------------------------------ IOF Job List Menu ------------- COMMAND ===> 1 --------------------------------- Output Jobs -------JOBNAME--JOBID--ACT-STA-OWNER----DEST/DEVICE--------RECS _ 1 USRMK4 J00694 SEL USRMK UNDJES2 192 057 2 USRMK4 J00699 USRMK UNDJES2 192 057 ------------------------------- IOF Job Summary -------------------- COMMAND ===> SCROLL --JOBNAME---JOBID--STATUS---RAN/RECEIVED----DAY--------DEST--------- USRMK4 J00694 OUTPUT 8:48 2/26/98 TODAY UNDJES2 --RC--PGM--------STEP-----PRSTEP---PROC-----COMMENTS---------------- 8 SASXA1 SAS STEP1 SAS --------DDNAME---STEP-----PRSTEP---STAT-ACT-C-GRP-D-SIZE-U--DEST---- _ 1 LOG * HELD Q 1 H 17 L UNDJES2 _ 2 JCL * HELD Q 1 H 75 L UNDJES2 _ 3 MESSAGES * HELD Q 1 H 70 L UNDJES2 _ 4 SASLOG SAS STEP1 HELD SEL Q 1 H 30 L UNDJES2 _ 5 SASLIST SAS STEP1 DONE SEL Q _ 6 SASPLOT SAS STEP1 DONE R UNDJES2 _ 7 SYSOUT SAS STEP1 DONE A _ 8 SYSUDUMP SAS STEP1 DONE 1
Check Status of Jobs LOC JOBNAME	From the ISPF Primary Option Menu: I for IOF COMMAND ===> (Press Enter) IOF Job List Menu will list your jobs
Purge Output PUR JOBNAME PUR JOBNAME.NN	From the ISPF Primary Option Menu: Option I IOF (Interactive Output Facility) From the IOF Option Menu: Press ENTER to display all of your output jobs ------------------------------ IOF Job List Menu ------------- COMMAND ===> SCROLL --------------------------------- Output Jobs -------JOBNAME--JOBID--ACT-STA-OWNER----DEST/DEVICE--------RECS-HELD _ 1 USRMK4 J00694 USRMK UNDJES2 192From the IOF Job List Menu type a C to cancel the job ------------------------------ IOF Job List Menu ------------- COMMAND ===> --------------------------------- Output Jobs -------JOBNAME--JOBID--ACT-STA-OWNER----DEST/DEVICE--------RECS _ C USRMK4 J00694 SEL USRMK UNDJES2 192 057 2 USRMK4 J00699 USRMK UNDJES2 192 057 From the ISPF Primary Option Menu: Option 3 Utilities Option 8 Outlist Option D to delete and Key in the Jobname in FOR JOB TO BE SELECTED If there are multiple jobs with the same name use Option L to List jobnames/id(s) via the TSO STATUS command. All jobnames with job numbers will be displayed. Clear the screen by removing the option L and pressing enter. Option D to delete and Key in the Jobname in FOR JOB TO BE SELECTED and JobID: JOBNN. This must include all 8 characters including the word JOB.
Print Output-IOF PRINT JOBNAME PRINT JOBNAME.NN	Follow the instruction for View Output Online From the IOF Job Summary screen --------DDNAME---STEP-----PRSTEP---STAT-ACT-C-GRP-D-SIZE-U--DEST 1 LOG * HELD A 1 H 17 L R211 _ 2 JCL * HELD Q 2 H 75 L UNDJES2 _ 3 MESSAGES * HELD A 1 H 70 L R211 Class Q is the default output class for TSO If the job has a status of HELD and Class Q: Type REL on the underscore of the corresponding DDNAME and type A in place of the Q for class. If the DEST is other then what is specified in the DEST column, change it to your destination printer by typing the REMOTE number under the DEST column.
LIST OFF UNN	To print: Option 6 Command from the ISPF Primary Option Menu In the ISPF Command Shell type: ===> TSO PRINTDS CCHAR DEST(RXX) Where (RXX) is your remote printer designation. Press ENTER ISPF Command Shell Enter TSO or Workstation commands below: ===> tso printds cchar dest(rxx) At the ENTER A DATASET OR DSNAME - prompt type: The User id does not need to be typed The Group: (separate the Group from Type with period) The Type The Data set member name enclosed in parenthesis Press ENTER IKJ56700A ENTER A DATASET OR DSNAME - GROUP.TYPE(MEMBERNAME) When ***** appears the job has been printed. Press ENTER to clear the *
Cancel command PA1	CANCEL From the Confirm Cancel screen Press ENTER key to confirm cancel request. (All changes will be discarded)
EDITING COMMANDS
Insert Blank Line I	Type an I in the line numbers column above the line where you want the lines inserted.
Insert Blank Lines I NN.N	Type an I space NN in the line numbers column above the line where you want the NN lines inserted.
Delete Blank Line D	Type a D in the line numbers column on the line you want deleted.
Delete Blank Lines DD	Type a DD in the line numbers column on the first line and DD in the line numbers column on the last line you want deleted.
Copy a Line C	Type a C in the line numbers column on the line you want copied. Place an A (after) in the line numbers column you want the data to follow or place a B (before) in the line numbers column where you want the data to appear prior.
Copy multiple Lines CC	Type a CC in the line numbers column of the first line you want copied and CC in the line numbers column of the last line you want to be copied. Place an A (after) in the line numbers column you want the data to follow or place a B (before) in the line numbers column where you want the data to appear prior.
Move a Line M	Type a M in the line numbers column on the line you want moved. Place an A (after) in the line numbers column you want the data to followed or place a B (before) in the line numbers column where you want the data to appear prior.
Move Multiple Lines MM	Type a MM in the line numbers column of the first line you want moved and MM in the line numbers column of the last line you want to be moved. Place an A (after) in the line numbers column you want the data to follow or place a B (before) in the line numbers column where you want the data to appear prior.
Duplicate a line COP NN to NN.N	Place a R (repeat) on the line to be repeated. The New line will be placed immediately after the line the R was placed on.
Duplicate Multiple Lines	Follow instructions to copy multiple lines.
Locate a string REV 'XX'	FIND XX
Global Changes CHA 'XX' TO 'YY'	CHA XX YY ALL
Single Change	CHA XX YY Changes first occurrence
Repeat Last Change	RCHANGE Changes second, third, etc. occurrence
Run a scan of the job	Add TYPRUN=SCAN to the job card. Then issue the SUBMIT command. View output online using those instructions.
Sort	SORT NN - where NN is the beginning column to sort from. SORT NN NN - only sorts from column NN to column NN SORT D - sort in descending sequence SORT A - sort in ascending sequence SORT NN A NN D - sort the first column in ascending order and sort the second column in descending order

LIBRARIAN USERS ONLY

LIB,COP LIBCOP

LIB,ADD LIBADD

LIB,REP LIBREP

LIBRARIAN USERS ONLY
LIB,COP	LIBCOP
LIB,ADD	LIBADD
LIB,REP	LIBREP